HOW TO DO AN AC FILTER CHANGE – AND WHY YOU SHOULD

An AC filter change is without doubt one of the only issues you are able to do as a part of your AC system upkeep. Most filters are readily accessible, and the method is homeowner-friendly. Easy, however a couple of ideas will provide help to do it like a professional.

Find the Filter Panel

Filters are in considered one of three locations:

At a Wall or Ceiling Grille

1. Wall and ceiling grilles have screws or latches to launch the louvered heart permitting it to pivot open to disclose the filter.
2. If within the ceiling, be particularly cautious as components can simply swing immediately and trigger damage. SAFETY FIRST – All the time train ladder warning.

Behind a Panel on the Blower Unit

Within the blower unit, there’ll sometimes be a panel with screws or latches. As you take away the filter entry, be aware the route of match and the way it aligns with different panels. Test gaskets to make certain they’re in good situation.

Within the Duct

If within the duct, there will even sometimes be a panel with screws or latches, and the identical applies as when it’s situated behind a panel on the blower unit.

Test Course

Most filters are labeled with a route arrow or different notation of which method the air is to stream via the filter. It might not be obvious to the bare eye, however there’s lots of expertise in filters. Filters are designed to “load” with filth, in order that they fill to capability and never simply develop into coated with filth. When air enters from the mistaken route, filth settles solely on the floor. The filter will likely be far much less efficient and can must be modified extra incessantly. Take a second to notice and verify the route of airflow indicated on the filter.

Substitute the Filter

OK, why point out this? As a result of there are some things to verify at this level:

• Document your filter change date in addition to the dimensions, sort, and the place you bought the filter.
• If there’s a upkeep tag on the tools, write this info on the tag when you are there.
• With a marker, label the filter panel and route of airflow.

All these are straightforward to do when you are doing the job and can save effort and time subsequent month.

Shut Up Tight

Filter match, gaskets, and panel match had been already talked about. Take the time to acquire the right match. It’s not uncommon for the filter to suit snugly, and you could want to make use of the panel screws to attract it closed the final 1/8” or so. This implies the gaskets are doing their job and there will likely be no air leaks. If the filter panel was sealed with tape (not unusual), make certain to use new tape. Should you moved insulation, gaskets or wiring to entry the filter, these should be restored.

Protected Disposal

Bear in mind, the filter you took out is loaded with stuff you don’t wish to breathe. It’s not precisely hazardous waste, however I’ve had sneezing suits from a carelessly-handled filter. Put the outdated filter in a bag or discard it within the trash as quickly as potential. On your personal well being, it’s not one thing you wish to hold round.

Name Full Consolation

Our personnel is educated to offer you the suitable recommendation for altering your filters. The best time to find out about filter alternative in your house is whereas the technician is there as a part of your Consolation Membership membership. They are going to gladly be aware dimension, sort, airflow, and provide help to discover a supply for the filters you want.

We may help you breathe clear air and hold your air conditioner clear and worry-free for years to come back. That’s the reason we’re known as Full Consolation. Name us as we speak at (561) 529-6262 or take a look at our web site at www.mycompletecomfort.com.