Air Duct Cleansing Course of in Columbus, Ohio, from Begin to End

Air duct cleansing sounds easy. You get a high-powered vacuum, stick it in a vent or two, suck up the particles, and also you’re carried out.

Like all issues HVAC, the method is way extra sophisticated than that. At the least it’s while you need to be thorough.

Sure, there’s a vacuum concerned, however the course of also can contain a custom-made truck, drop cloths, chemical substances, compressed air, and specialised instruments.

And nonetheless, we’re not carried out.

In case you’re occupied with having your ducts cleaned, there are lots of corporations within the Columbus, Ohio, space that may provide to do it.

We consider our strategies at Hearth & Ice are higher, although. After we’re carried out cleansing your ducts, you’ll have the cleanest air attainable coming out of your vents – as a result of we’re that thorough.

Alternatively, a awful duct-cleaning job leaves behind mud, mildew, viruses, and typically worse. The one factor cleaned out will likely be your pockets after you pay for a substandard job.

Permit us to display one of the best, most full technique in Central Ohio from begin to end.

Air Duct Cleansing Course of

After we get to the client’s house, we placed on my shoe covers so we’re not monitoring particles into the home. And I’ll have a face masks on always.

We’ll introduce ourselves and we’ll go together with the house owner to the furnace. Then we begin speaking to them concerning the course of and every little thing that it entails. We‘ll stroll them by step-by-step what I’m going to take action there are not any surprises.

I’ll be sure that their HVAC system is functioning, then I’ll flip it off. If we don’t, the furnace (or air handler) will work in opposition to the vacuum, which received’t be as environment friendly in eradicating mud and particles. After I’ve carried out that, I’ll ask the house owner to present me a tour of the house in order that I can find and rely what number of return and provide vents there are. I’ll additionally do a fast inspection of the furnace, the condenser coil, and dryer vent.

We’ll cowl every register with an adhesive movie referred to as grill masks tape. This helps with the suction within the ductwork and in addition prevents particles from popping out of the vents. I’ll be aware of any dampers on the ducts and ensure that they’re open.

Then I’ll have one other dialog with the client to verify they’ve a transparent understanding of the work to be carried out. I’ll allow them to know that I’ll be out and in of the home a number of instances as a result of I’ve to travel to the truck repeatedly to arrange my gear.

I’ll warn that the vacuum is loud and will likely be working repeatedly for the following hour or so.

We now have to maintain one of many home’s doorways open for the hose, however we do have a product that mitigates among the draft coming in. It’s a canvas roll with two PVC pipes on every finish that matches on the body of the door. It has a zipper that enables me to go out and in, and on the backside it has an arch in order that I can put the hose by.

From there, I’m going to put down protecting fabric to guard the flooring. We now have plastic nook guards, as effectively, so the hose doesn’t injury the corners of partitions. The vacuum hose has an eight-inch diameter, and will trigger injury if we’re not cautious.

I lay out the vacuum hose from the truck to the furnace, then I’m going to get the compressor hose and lay that out. The compressor places out about 250 kilos per sq. inch of air.

Then I’m going to go to the provision and return trunks by the furnace and reduce eight-inch holes. I hook up my vacuum hose to the provision trunk. I’ll double-check that the HVAC is off.

I flip the vacuum on. Then we go straight to the vents, poke just a little gap within the masks, and begin blowing air with one thing referred to as an air wand by the vents. That pushes the particles that’s in there all the best way again into the principle provide trunk and into the vacuum. You’ll hear particles rolling within the hose because it’s being vacuumed.

We additionally take away any particles that’s clinging to the vent.

As soon as I’m going by all the provide vents, I’ll go downstairs, take the hose off of the provision trunk and fix it to the return trunk. And I’ll undergo the identical course of with the return vents that I did with the provision vents utilizing the air wand.

As soon as I end with that, I’ll return downstairs and reduce two four-inch holes within the ducts. The explanation I’m doing that’s I need to get a great have a look at the within. I want sufficient house to place my digital camera by there and see the way it appears. I take footage earlier than I begin agitating the mud.

I additionally drill one-inch holes, as a result of that’s the place I’m placing my agitation instruments. We now have issues referred to as air rods. They’re lengthy tubes, about 5 ft lengthy. These tubes permit the compressed air to go all the technique to the tip of the agitation instruments.

We now have a number of agitation instruments. We now have one referred to as the octopus whip. It has eight rubber fingers which have holes on the finish of it that air goes by. As quickly as that air begins coming by, these fingers begin flying round in every single place. It hits all the partitions of the ductwork and loosens any particles that’s on the partitions.

We even have forward-pushing and reverse-pushing skipper balls. If it’s the ahead pushing one, it pushes the particles ahead, and vice versa.

I do the provision and return trunk strains. As soon as I’m carried out with that, I’ll take a number of footage to verify every little thing that was in there earlier than is gone. We don’t simply loosen particles from the ductwork, run the vacuum, and name it a day. We ensure that your ductwork is totally clear. We have a look and see what it appears like earlier than we begin the method, after which we have to have a look at it afterward.

Generally there’s materials that adheres to the ductwork, and no quantity of agitation goes to take away that. At that time, we’d like to consider a chemical-based spray. We now have two merchandise that we are able to use. They kill 99.99% of micro organism.

Final, we vacuum the furnace’s return drop, the plenum, the evaporator tray, and the blower wheel as some particles may have gotten in these areas in the course of the cleansing course of. If the evaporator coil is accessible, we’ll examine it, air wash it, and vacuum it.

If the coil is flawed or wants a deep cleansing, we’ll alert the house owner and provide suggestions for additional work.

We’ll additionally examine the furnace and inform the house owner if we see it wants any upkeep.

As soon as every little thing is as clear as attainable, I’ll use metallic plates to cowl up the holes I reduce within the ductwork. We’ll use metallic tape or caulking to completely seal the place the metallic plates are protecting the holes in order that every little thing is sealed. We even have plastic plugs to fill within the one-inch holes.

Equally, dryer ducts can clog and forestall the environment friendly working of your dryer. If we’re already at your house to carry out air duct cleansing, we are able to additionally clear your dryer vent as a further service.

I present the purchasers the earlier than and after footage. We be sure that every little thing is cleaned up, particularly across the furnace. We sweep, we vacuum.

As soon as that’s carried out, I shut off the vacuum and the instruments return into the truck.

I do a remaining walk-through with the client to verify there isn’t any furnishings misplaced. I additionally take away the grill masks tape and reply any questions. I’ll level out any issues I found, reminiscent of gaps within the air ducts.

How Lengthy Does an Air Duct Cleansing Take?

Relying on the scale of your own home, it might probably take wherever between two and 4 hours. Elements figuring out the job size embrace the scale of the home, the variety of rooms, location of the furnace, and if there are a number of techniques.

How A lot Does an Air Duct Cleansing Price?

Our duct cleansing pricing is damaged down into house sizes:

As much as 1,200 sq. ft. – $578

1,201 sq. ft. – 2,000 sq. ft – $736

2,001 sq. ft. – 2,800 sq. ft – $894

2,801 sq. ft. – 3,600 sq. ft – $1,157

Over 3,600 sq. ft – Name for a quote

We additionally present further companies whereas we’re at your house, reminiscent of dryer vent cleansing and whole-home disinfectant. Please go to our web site for a whole listing.

We Are Columbus, Ohio’s, Air Duct Cleansing Specialists

Through the years, ducts are going to build up lots of mud, mildew, and lots of particles, particularly in older homes.

The primary profit of getting clear ducts is, in the beginning, having the peace of thoughts that there’s nothing sitting in there that may have an effect on your respiratory.

It additionally helps the HVAC gear. The cleaner you preserve it, the higher it’s going to run.

Get began on the street to cleaner ducts by visiting our duct cleansing web page and scheduling an appointment.

Learn extra: Air Duct Cleansing in Columbus, Ohio: Course of, Advantages, and Value

4 Advantages of Air Duct Cleansing in Columbus, Ohio