Common Problems with Furnace You Need to Know | Kitchener ON


As a homeowner, there is nothing
more disappointing than a broken furnace. But, unfortunately, we all have to
deal with heating system maintenance concerns at some point in our lives. While
you should get your furnace serviced as soon as possible if it stops working,
there are several things you can check for to detect problems early which can
help you to save money for furnace repair. However, you can always contact
professional companies like Interstate Air conditioning and Heating for
furnace repair in Brooklyn for
assistance.

So, here are 10
common problems you can face with your furnace along with their solutions.

The Thermostat Is Not Heating

If the furnace is not working
properly, it becomes important to check whether the thermostat is on or not. Also,
whether it is set to the correct temperature? Even if you are convinced that it
is, you must double-check. Sometimes, it can be turned off by accident or the
temperature was adjusted too forcefully. There can be problems with the
batteries also. You can always check these basic issues by yourself. Apart from
this, the other reason your thermostat is not heating is that it might be
broken.  A broken thermostat is one of
the most common furnace issues. If your fan is always running, it’s a solid
indicator your thermostat isn’t operating correctly. This will cause your
thermostat battery to run, and cause your furnace to perform inefficiently. Set
the fan to auto and see whether it runs continuously at all temperature levels
to determine if this is the case.

Pilot Light or Ignition Issues

The effective operation of your
furnace depends on the presence of a pilot light. If it’s flashing or has a
yellow hue, your gas furnace may be emitting too much carbon monoxide. A call
to an efficient furnace repair Brooklyn should be made for any changes to your pilot light.

It’s also recommended to inspect
the condition of your flame sensor if your furnace uses an electric ignitor.
When your furnace senses gas but no flames, this vital safety function shuts
down the whole system. When these sensors become filthy, they are unable to
“see” the flames, causing everything to be turned off unnecessarily.
To clean yours, follow these steps:

     Turn
off the electricity to your furnace either at the unit or at the circuit breaker.

     The
gas supply valve should be shut off.

     Carefully
remove the flame sensor, which is a thin metal rod situated at the burner
assembly, with a 14-inch hex-head screwdriver.

     Use
fine-grit sandpaper or an emery board to gently massage the sensor. (A $1 bill
will do the trick, tool)

     Using
paper, wipe away any leftover dust.

Noises from Your Furnace

Is your furnace emitting a
popping, pinging, or rattling sound? A number of possibilities due to which it
is happening.  The most typical reason
for rattling noises on a furnace is loose panels that need to be tightened.
Pinging or popping noises are most likely coming from the ducts. It will expand
and shrink depending on whether you’re heating or cooling your home.

Heat Exchanger Cracked

Unfortunately, this is an
expensive problem. Your heat exchanger is a system that helps your furnace to
function safely by separating the hot flame from the air. If your home is
overheated or you fail to keep your air filters well on a regular basis, your heat
exchanger may break. You can call a furnace professional from Interstate Air
Conditioning or heating which is an expert company and has an excellent staff of
Furnace repair in Brooklyn to diagnose the problem if your heat goes off. In
most cases, this makes the replacement of the heat exchanger mandatory.

Schedule a Repair
Today

We’ve discussed a few typical furnace repair issues as
well as some potential remedies. You can still do a lot to keep your furnace in
good working order. Furnace maintenance, on the other hand, is the strongest
defence against furnace repair. System performance and energy efficiency can
both benefit from routine maintenance. Your furnace, on the other hand, is a
complicated device that occasionally requires the assistance of professional
heating and conditioning company

When you want an HVAC specialist to restore your home’s
furnace, contact Interstate Air Conditioning & Heating for furnace repair in Brooklyn. Make the
most of your money by seeking professional assistance from the start.

Whether you require installation, repair, or maintenance, our technicians will assist you with top-quality service at any time of the day or night. Take comfort in knowing your indoor air quality is the best it can be with MOE heating & cooling services Ontario's solution for heating, air conditioning, and ventilation that’s cooler than the rest.
Contact us to schedule a visit. Our qualified team of technicians, are always ready to help you and guide you for heating and cooling issues. Weather you want to replace an old furnace or install a brand new air conditioner, we are here to help you. Our main office is at Kitchener but we can service most of Ontario's cities


Source link

Add Comment