5 Furnace Troubleshooting Tips To Try Before Getting Help

5 Furnace Troubleshooting Tips To Try Before Getting Help


As a homeowner, knowing a few furnace troubleshooting tips can help you when the system stops working. These could save you the discomfort you could experience waiting for an HVAC technician to repair it. Most of the time furnaces operate seamlessly, but issues with the thermostat, gas supply or electrical components can interfere with its operation.

  • Check the thermostat


    . The thermostat controls when yourfurnace turns on and off. If it’s malfunctioning or set to “off” or “cool,” that could be your problem. It could also be set too low. Listen for a click and shortly thereafter, the gas entering the burner.

  • Look at the air filter for the furnace


    . Some have switches that shut the furnace off if there’s inadequate airflow through the system. You’ll increase the life of your furnace by keeping the filter clean.

  • Check the power supply


    . Look inside the circuit breaker box and verify that the circuit breaker hasn’t tripped. If it has, turn it off completely, and then turn it back on. You can also check the switch inside the furnace, which may be a switch or a button. Push or trip it. Most of the time a furnace won’t shut itself down. If this happens again shortly after turning the furnace on, contact an HVAC contractor to handle this aspect of furnace troubleshooting, and turn the system off.

  • Check the gas valve. 


    Verify that the gas valve


     


    to the furnace or your home is on.

  • Inspect the pilot if your furnace uses one


    . Furnaces have a thermocouple that will shut the gas supply off when the pilot stops burning. The pilot or thermocouple may be dirty or need replacing. If you’re an experienced do-it-yourselfer, you may be able to clean it. If you’re uncertain, let a pro do it for you. If your system is pilotless, the flame sensor may be dirty. If you’re confident of your ability, you may be able to clean it. Both the thermocouple and flame sensor are critical safety features.

To learn more about furnace troubleshooting and avoid problems with its operation, contact 

Keith Air Conditioning

, providing HVAC services for Baldwin County homeowners since 1964.

Whether you require installation, repair, or maintenance, our technicians will assist you with top-quality service at any time of the day or night. Take comfort in knowing your indoor air quality is the best it can be with MOE heating & cooling services Ontario's solution for heating, air conditioning, and ventilation that’s cooler than the rest.
Contact us to schedule a visit. Our qualified team of technicians, are always ready to help you and guide you for heating and cooling issues. Weather you want to replace an old furnace or install a brand new air conditioner, we are here to help you. Our main office is at Kitchener but we can service most of Ontario's cities


Source link